Portable power stations are versatile devices that can be used for camping, working off-grid, power outages, as well as reliable backups for your personal electronics. However, first-time users may find several buttons, outlets, and indicators a bit overwhelming.
Thankfully, turning on a SOUOP portable power station is a simple operation. On most of their power stations, the main power button controls the device, while separate physical buttons control particular power outputs (AC, DC, USB).
Here is a simple guide that will walk you through the process of preparing a SOUOP battery for use.
Check the Battery Before You Turn It On
Before you do anything else, use the LCD panel to check how much power is left in your battery. Most SOUOP power stations indicate the battery level; some offer a visual representation of the energy level.
If the battery is low, connect your power station to a suitable power source (AC or solar). Depending on the model, your SOUOP portable power station supports AC and/or solar charging. Some stations also support vehicle charging – they come with a special vehicle cable.
As a rule of thumb, make sure your battery has enough power to support the devices you need to power. Remember that a high-power appliance (e.g., a chainsaw) will drain the battery faster than a portable phone charger.
SOUOP offers a wide range of battery-powered stations. For instance, their standard and expandable power station series offer a variety of capacities and power levels.
Find the Main Power Button
Having checked the battery level, proceed to the next step, which is to locate the Main Power button of the power station.
Depending on the model, the power button can be placed differently. Look for particular signs that denote the power button area. Avoid confusing the Main Power button with buttons that control AC and DC power output.
Note that on some SOUOP power stations, the Main Power button needs to be held for the device to turn on.
For example, the SOUOP 1800W user guide indicates that you need to hold the Main Power button for about three seconds for the power station to power on. Upon turning, the power button indicator and the LCD will light up.
Press and Hold the Power Button
Having found the power button, press and hold it. While the power button is pressed, count to three.
As noted above, on some SOUOP power stations, you need to hold the Main Power button for three seconds for the device to power on. On other models, the power-on process is different. For instance, on S1, the user needs to briefly press the Main Power button to turn on the power station.
Once you have successfully turned on the power station, the LCD screen will illuminate. The screen will display information about the battery level, power outputs, and other parameters. The exact information that will appear on the screen depends on the model of the power station.
For example, the instruction manual for the SOUOP S1 indicates that after the power button is pressed and held, the screen lights up.
Take Note of What the Screen Says
The screen is an essential part of every SOUOP power station. While it may seem superfluous at first, it is, in fact, a great tool that helps you keep track of the battery level and the power outputs.
Depending on the model, the screen can display the current battery level, power outputs, and additional information about the power station’s status.
If the battery icon (or a percentage sign) appears on the screen, that means the power station has been successfully turned on. What’s more, the screen often displays warning signs in case of an emergency (overloaded power station, overheating, etc.).
Turning the AC Output On
The main power button only controls the power station. If you need to use an AC appliance, you will have to turn on the AC output.
First, turn on the power station. After that, locate the AC button and follow the manufacturer’s guidelines for turning the AC output on. When the AC output is turned on, the power station will display an indicator signifying that the AC output is now active (e.g., the AC indicator lights up).
You can then proceed to connect your device to the power station. Make sure to double-check the power outputs and the power requirements for the appliances you need to power.
SOUOP’s manual for the S1 makes it clear that the AC output is controlled by a separate switch. In this case, the user needs to turn the power station on and then use the AC ON/OFF button to control the AC output.
Before connecting any devices to your power station, make sure to review the input and output voltages and amperes for both the power station and the devices.
Turning the DC and USB Outputs On
The process is generally similar for DC and USB outputs. First, you need to turn on the power station. After that, you need to follow the manufacturer’s instructions for powering DC output on.
DC outputs generally have multiple ports: USB-A ports, USB-C ports, and a 12V port (for car accessories), and/or other DC outputs. Each output has different power outputs.
For instance, according to the manual, the SOUOP S1 portable power station has multiple DC outputs: two USB-A ports (5W and 10W), a USB-C port (18W), and a 12V DC car port (30W).
Having turned the DC output on, you can use your power station to charge your phone, tablet, lights, and other portable devices with USB ports.
Newer SOUOP power stations even have USB-C PD ports – in other words, you can use your power station to charge laptops and other devices that support USB-C charging.
If the Power Station Won’t Turn On
If for some reason your power station won’t turn on, do not panic. First of all, make sure that the battery is not dead. If the battery is low, connect the power station to a power source and wait for it to finish charging.
Make sure that you are using the correct power button. Remember that some of the physical buttons only control the power output; they do not turn the power station itself on.
If the power station still doesn’t seem to turn on, try connecting it to a power source again. Wait for a few minutes, and then try pressing the main power button again. Finally, consult the product manual to learn the exact power requirements and the instructions for turning the power station on.
SOUOP makes a variety of power stations, including the 600W, 1200W, 1800W, 2400W, S1, S2, S3, etc. On some of these power stations, the process for turning them on is different. Consult the manual that came with your power station.
Make Sure Your Device Is within the Power Limit
After you have successfully turned the power station on, be mindful of the power outputs. Every power station has a limit: connecting an appliance that requires more power than the power station can deliver may result in malfunction.
For instance, the SOUOP S1 has a continuous AC output of 2000W, with a peak of 2500W. Other SOUOP power stations have different limits. Thus, when using a power station, always keep in mind its power output.
Never assume that all power stations are equal; consult the manual to review the power output specifications for your station.
How to Turn Off a SOUOP Portable Power Station
In most cases, turning the power station off is as simple as turning it on.
First, make sure to disconnect all devices that were connected to your power station. After that, press and hold the Main Power button once again.
On some of the SOUOP power stations, you need to hold the Main Power button for three seconds for the power station to power off. When the power station is turned off, the power button indicator and the LCD screen will be off.
Note that turning the power off is not the same as disabling individual power outputs. If you are done using the power station, make sure to turn it off.
A Few Important Safety Tips
Before you use a SOUOP power station, there are several things that you should know.
First of all, make sure that you are using the right accessories. Always avoid using broken or frayed power cords and connectors. According to the SOUOP manual, using incorrectly sized or non-standard connectors may damage the device.
Make sure that your power station does not overheat. Always place it on a well-ventilated surface. Never leave a functioning power station unattended.
Most importantly, never expose the power station to the elements (rain, extreme temperatures, etc.). Avoid using the power station in conditions that are not recommended by the manufacturer. When using multiple devices, make sure that the overall power output is within the limits of the power station.
Final Words
Generally, powering a SOUOP power station is a simple procedure that does not require much in the way of expertise. Remember that the power button usually has several functions.
To turn the power station on, make sure that your battery has some power in it, and then briefly press the main power button. Once the power station is turned on, check the battery level and the power outputs.
For AC devices, you will need to turn the AC output on. Similarly, to power USB devices, you will need to turn the USB output on.
The exact procedure depends on the model of the power station. Always consult the product manual to learn the exact location of the power button and the power outputs for your station. You can find downloadable versions of SOUOP’s manual on their official website.
Once you know how to use your power station, you can take it with you on camping trips, use it as a backup energy source, and much more.
FAQ
How can distributors train customers to use SOUOP portable power stations?
SOUOP portable power stations are designed with separate controls for the main power system, AC output, DC output, and USB ports, making the operating process easy to explain to end users. For distributors and dealers, SOUOP can provide product manuals, specifications, product images, videos, and training materials to help sales teams and customers understand startup procedures, output controls, charging methods, and basic troubleshooting.
Can SOUOP provide different operating configurations for different markets?
Yes. SOUOP offers different power station configurations for regional markets, including AC voltage, output frequency, and plug types such as EU, US, UK, AU, and JP. For OEM orders, buyers can also discuss customized output configurations, labels, packaging, accessories, and other market-specific requirements with the SOUOP team.
How can distributors help customers choose the right SOUOP power station?
The most important factors are the customer’s required output power, battery capacity, connected devices, and intended application. For example, 600W–700W models are suitable for portable electronics, laptops, lights, and short outdoor trips, while 1200W, 2000W–2400W, 3600W, and 5000W models provide progressively higher output for home backup, RVs, workshops, outdoor work, and emergency applications. Distributors can recommend a model by checking both the customer’s highest continuous load and any startup surge requirements.
What product information should distributors provide before selling a SOUOP power station?
Before recommending a model, distributors should clearly explain its rated AC output, peak power, battery capacity, available AC/DC/USB outputs, charging methods, operating temperature range, and applicable safety instructions. Customers should also understand that the total connected load must remain within the rated output of the selected model. SOUOP can provide product specifications, manuals, certification documents, and other sales materials to support distributor training and customer communication.
Can SOUOP provide OEM/ODM customization for portable power stations?
Yes. SOUOP supports both OEM and ODM projects. Depending on the project, customers can customize items such as logo, housing color, packaging, accessories, output configuration, battery capacity, labels, manuals, and selected electrical configurations. Sample evaluation is recommended before mass production, allowing distributors, brands, and importers to confirm the product operation and market requirements before placing a larger order.
